Oil & Gas

Your Trusted Partner
in the Oil & Gas Industry

The Oil & Gas industry demands precision, reliability, and safety. At Rosco Procom, we specialize in delivering top-notch products and services that drive efficiency and success.

The Oil & Gas industry relies on precision, reliability, and innovation.
At Rosco Procom, we specialize in providing cutting-edge solutions that power efficiency and performance.

The Oil & Gas industry relies on precision, reliability, and innovation. At Rosco Procom, we specialize in providing cutting-edge solutions that power efficiency and performance.

Rosco Procom provides a range of services tailored to the Oil & Gas industry, including:

Airflow Testing

We provide on-site audits and surveys of air-cooled heat exchangers allow us to boost the performance and reliability of your equipment.

Experienced personnel conduct onsite air velocity and static pressure measurements and a report recommending the best solutions for optimal performance is provided.
Based on our recommendations, we can service your fans, rotating parts, header boxes and exchange surface.

Pump Service and Maintenance

We provide inspection, servicing, repair and commissioning of chemical injection pumps, progressing cavity pumps and positive displacement pumps.

Oilfield Equipment Rentals

We offer short and long-term equipment, complete technical assistance, and flexible rental periods. When developing a rental plan for our customers, we consider all application requirements and parameters.

Available rental equipment includes:
• Pressure Relief Valves
• Val-Tex Pumps
• Haskell Pumps
• Dart/Plug Launching Top-Drive Cement Swivel heads (single and double)
• Pneumatic and Electric Chemical Injection Skids – we maintain a full selection of CheckPoint pumps and packages, stocked and ready to go on a moment’s notice.

Oil Well Equipment

We provide inspection, maintenance & repair, servicing and testing of subsurface pumps (reciprocating rod pumps and progressive cavity pumps).
Spacing of progressive cavity pumps.
We offer an inhouse inspection program for pumping jack units by incorporating our suppliers’ historical data and software tracking system which includes:
Traceability of customer information
Unit’s location and type
Access to past service reports
Incomplete and false service reports
Scheduling reoccurring jobs
Accurate and timely quoting and invoicing
We provide inspection, repair, reconditioning, maintenance and installation of new and used pumping jack units and drive heads. We also offer replacement parts for pumping jack units.
Repair and testing of land rig draw-works, crown-o-mantic systems and crown components.
Inspection, repair and testing of Blow out preventers, elevators, spiders, slips, rotary tables and associated tubular handling equipment.
Cleaning of down hole filtration equipment (sand screens).
Inspection, repair, maintenance and testing of Echometer liquid level monitoring equipment.

Rig Spares

We source, supply and provide delivery of replacement parts and components used to maintain and repair onshore or offshore drilling rigs. Our team of experienced oilfield personnel provide technical oversight and onsite operational support.
We are the authorized distributors of various OEM drilling equipment products. Our spares can include parts for: Mechanical systems: pumps, draw works, mud agitators, winches, rotary tables, top drives, elevators, slips, dog collar clamps; etc.
- Electrical systems: motors, switchgear, transformers, lighting, control panels.
- Hydraulic & pneumatic systems: valves, hoses, actuators, cylinders.
- Mud systems: mud pumps, shale shakers, degassers, desanders/desilters.
- Safety equipment: blowout preventer (BOP) parts, fire suppression systems.
- Consumables: gaskets, seals, filters, lubricants, bearings, fasteners.
We provide our customers with integrated maintenance and spares management, including the following services: Procurement & sourcing: Finding OEM or approved replacement parts.
- Inventory management: Stocking critical spares to minimize rig downtime.
- Logistics & delivery: Managing customs, documentation, and transport to remote sites.
- Technical support: Ensuring parts compatibility and installation guidance.
- Aftermarket & refurbishment: Repairing or upgrading existing rig components.

Testing, Certification and Calibration

Our Company operates under the certification of ISO 9001:2015 QMS, making management systems traceable and auditable, focusing on meeting Customer Requirements and monitoring Customer Satisfaction. QHSE plays a paramount part in our daily activities particularly when it pertains to our onshore testing facility and to the offshore environment.

Our hydrostatic test bay (up to 20,000 psi) is fully functional with a primary pump and back-up pump. We have a covered work area and craneage (5 ton) for equipment lay down and stack-up. We have a service and maintenance bay, equipment wash bay and warehousing for customer supplied product and equipment (including cold storage for elastomer seals etc.).

Our Testing and Certification Department for oilfield high-pressure iron management plays a crucial role in ensuring the safety and reliability of equipment used in oil and gas operations.

High-pressure iron refers to the specialized pipes, valves, and fittings used to control the flow of fluids in high-pressure environments, such as drilling, completion and well servicing.

Valves

RoscoProcom are the authorized agents and supplier of Neway, Balon, SOFIS and Forum:

We offer complete solutions for industrial valves that are currently utilized in the oil & gas sector.
Provision of project collaborative management systems and services.
We offer fast tracking of orders via our supplier’s project document control center.
Preventative & predictive maintenance oversight with valves.
We can facilitate the logistics for importing products from overseas.
Troubleshooting equipment malfunctions with OEM guidelines.
Our team of skilled engineers handles the installation and commissioning of SOFIS valve interlocks with precision and expertise. Our thorough installation process includes careful planning, installation, and comprehensive testing to ensure everything functions perfectly.
We provide Smith Interlocks, Netherlocks interlocks, Key management, EasiDrive actuators, Power Wrenches and FlexiDrive remote valve operator equipment.
We offer relief valve inspection, repair, service, testing, actuation and re-certification inclusive of shear relief valves.
We provide industrial Valve coatings and cleaners.
We offer inspection of Pig launchers and trap closures.

Downhole tools

RoscoProcom Limited specializes in the provision of drilling and completion wellheads, liner hangers, cementing, production and completion down-hole tools. Our objective is to enhance and offer a comprehensive product portfolio, which positively impacts our customer’s operations.

We provide the following tools with services:

Liner hanger systems – Mechanical & Hydraulic
Completion & Production Packers – Mechanical & Hydraulic
Permanent & Retrievable Seal Bore Production Packers
Bridge Plugs – permanent/retrievable Wireline Set & Mechanical Set
Cement Retainers
Enercat Tool – Production Optimization: Reduces costs in the management of Paraffin, Asphaltene, Emulsion, Viscosity, and Scale. Reduces the use of chemicals and energy in heating and therefore the carbon footprint. improves the API and increases production.

Installation and maintenance of Offshore Wastewater Treatment Systems

We provide sales, inspection, servicing, repair and commissioning of De Nora OMNIPURE™ equipment which includes three lines of field-proven electrolytic offshore wastewater treatment designs – MC/MXMP and Series 64G2 – that carries a legacy of more than four decades of advanced electrolytic treatment to the market.

OMNIPURE™ equipment is the only marine sewage system that oxidizes sewage in an electrochemical cell as well as generates sodium hypochlorite for the disinfection* of the sewage streams. It offers effective electrolytic treatment of both black and gray water through a patented and certified process.

Wellhead / Tree installation, maintenance and testing services

RoscoProcom personnel are versed in the removal and re-installation of wellhead and tree valves, service and maintain trees and valves, removal and re-installation of wing valves and casing valve change out.
We provide the inspection, service, lubrication, pressure testing and assessment of valves and chokes.
We provide an assortment of replacement parts for maintaining customer valve and choke equipment.
We replace worn-out or damaged parts promptly using genuine OEM replacement parts. This includes seals, springs, valves, and any other components that affect the equipment’s functionality.
Perform services works (remove/install) of blind flanges & valves using VR plugs & SD lubricator.
We provide bolt torque equipment and services.
We conduct hydrotesting of newly installed valves, removal of VR plugs.
We facilitate the installation of ported flanges on valve outlets with needle valves, double block & bleed instrument manifolds

Cementing accessories – centralizers & float equipment

Centralizers
We provide bow spring, under-reamed centralizers, solid body, ridged, roller, hinged, composite and one-piece machined subs, utilizing seamless API pipe.
Centralizer sizes -> 2 7/8”, 4 1/2” 5 1/2”, 7-5/8” / 9-5/8” / 10-3/4” / 11-3/4” / 11-7/8”, 16”, 20” and 30”.
The In-line SUB has been designed for extremely tight clearance where annular clearance is less than 0.75”
We offer Slip-on, Hinged and Heavy Duty Slip-on Stop Collars.
Bonded Drill Pipe Protectors & Thermal spray-on centralizers and collars
Guide shoes, Reamer shoes, Casing drilling shoes
Reamers capable of reaming past obstructions due to 360° TCI Cutting Structure
Aggressive right-hand blade design for both reaming & agitation
Profiled Nose available in high grade Aluminium, Composite or Phenolic materials
High Flow 5Kpsi & 10Kpsi Valve exceeding API 10F 111C certification (Flow-loop tested)
Float Collars
Single, Double & Auto-Fill Valve options available – High Flow 5Kpsi & 10Kpsi Valve exceeding API 10F 111C certification (Flow-loop tested)
Non-rotating top and bottom plugs – HNBR and NBR Material Options (Hydrogenated Nitrile Butadiene Rubber)
Burst Disks ranging from 400 PSI – 1,600 PSI
Thread Locking Compound

Equipment Inspection

This department is responsible for inspecting and assessing the condition of high-pressure iron equipment. This includes 2”, 3”, 4”, 6” and 8” flanged piping, wellhead equipment, tree equipment, choke manifolds, various sizes of valves, high pressure anaconda hoses, PRV’s, safety valves, cement heads, nuclear densitometers and other components.

Our experienced technical team can conduct audit assessments of drilling mud & brine plants and cement bulk plants. The services we offer include maintenance of equipment such as Pressurized Vessels, PRV’s, Gauges, Hoses, Compressors, Butterfly Valves, Air Dryers and Cement Dust Collectors.

Cementing accessories – centralizers & float equipment

Centralizers
We provide bow spring, under-reamed centralizers, solid body, ridged, roller, hinged, composite and one-piece machined subs, utilizing seamless API pipe.
Centralizer sizes -> 2 7/8”, 4 1/2” 5 1/2”, 7-5/8” / 9-5/8” / 10-3/4” / 11-3/4” / 11-7/8”, 16”, 20” and 30”.
The In-line SUB has been designed for extremely tight clearance where annular clearance is less than 0.75”
We offer Slip-on, Hinged and Heavy Duty Slip-on Stop Collars.
Bonded Drill Pipe Protectors & Thermal spray-on centralizers and collars
Guide shoes, Reamer shoes, Casing drilling shoes
Reamers capable of reaming past obstructions due to 360° TCI Cutting Structure
Aggressive right-hand blade design for both reaming & agitation
Profiled Nose available in high grade Aluminium, Composite or Phenolic materials
High Flow 5Kpsi & 10Kpsi Valve exceeding API 10F 111C certification (Flow-loop tested)
Float Collars
Single, Double & Auto-Fill Valve options available – High Flow 5Kpsi & 10Kpsi Valve exceeding API 10F 111C certification (Flow-loop tested)
Non-rotating top and bottom plugs – HNBR and NBR Material Options (Hydrogenated Nitrile Butadiene Rubber)
Burst Disks ranging from 400 PSI – 1,600 PSI
Thread Locking Compound

Calibration

Calibration involves adjusting and verifying the accuracy of measurement instruments.

We are capable of servicing and calibrating Gas Samplers, Digital and Analog Pressure Gauges, Pressure Recorders, Pressure Transducers and Pressure Relief Valves used in oilfield operations.

Pressure Testing (Hydro & Gas)

Pressure testing is a key integrity and qualification test for many types of pressure-containing equipment used in the Oil and Gas industry. We conduct pressure testing in the field, where possible, as well as in our test-cell in a safe and controlled environment.

We are capable of Testing & Certifying: Flowline Equipment, Valves, Hoses (standard/cryogenic/breathing air), Manifolds, Fittings, Regulators and Pressure vessels.

Function Testing

Optimum equipment performance allows for smooth production and cost savings in any industry. Downtime on machines and tools contribute to delays, which in turn can contribute to increased costs and affect your bottom line.

We perform function testing on mechanical, pneumatic and hydraulic tools, ensuring that they are operating to the manufacturers’ performance parameters and verify that they are fit for purpose.

Should the need arise, we will work continuously to ensure that your equipment is back on the jobsite, performing efficiently to get the job done.

We are capable of Function Testing: Pumps, Test Packs, Pneumatic, Hydraulic & Electric Power Tools, Grinders, Flange Spreaders, Reciprocating Saws, Scalers, Impact guns, etc.

Documentation

Maintaining comprehensive records is critical for tracking the history of high-pressure equipment. This includes test reports, calibration certificates, maintenance logs, and equipment service history. These records are essential for compliance and decision-making.

We have invested heavily in calibration equipment and software that allow for accurate graphing and charting, giving the client true “proof of test”.

We offer this in conjunction with our certificates of conformance (COC) so that our clients can verify the outcome of each calibration or test performed.

Sales & Rentals

Rosco ProCom represents top OEM brands and products whose reputation is cemented in decades of commitment and has contributed to building this industry.

Our T&C Unit offers both sales and rental equipment as an option for our customers. As such, we have replacement equipment readily available as your need arises.

Our rental equipment includes high pressure pump packages, pumping iron (flowline), pressure relief valves, digital gauges, grease injection pumps (Valtex), sampling cylinders, chart recorders, high pressure test pumps and air booster pumps.